Capacity
The Hotchkiss Group of Companies have an extensive capacity capability for all of your heavy engineering needs.
The Kent based workshop houses the following:
- Inventor Design and Programming Facilities (CAD CAM)
- 60 TONNE THROUGH WORKSHOP CRANEAGE
- CNC Milling Machines
- CNC Lathes
- Manual Lathe
- CNC Roll Grinder
- Dynamic Balancing
- Vertical Borer
- Fully Equipped Toolroom Machines
- Transport
CNC MILLING MACHINES
- Alesa Monti 5 Axis large milling machine with 1.8M rotating table 3.8M O/D X 2.5M high X 1.2M wide – 10 TONNE CAPACITY.
- CNC Correa travelling column milling machine. 7.6M long table x 1.2M wide x 1.5M high - 10 TONNE CAPACITY.
- CNC Correa travelling bed milling machine. 2M long table x 0.8M high x 0.8M wide - 5 TONNE CAPACITY
CNC LATHES
- CMZ CNC lathe single turret machine with driven tooling, 350MM O/D over bed x 1.3M long, programable tailstock.
- Binns & Berry CNC lathe with 'C' axis and split bed, 1.25M O/D over bed x 12M long or 2M O/D x 300MM long, programable tailstock - 10 TONNE CAPACITY.
- Binns & Berry CNC lathe with split bed 1.26M O/D over bed x 10M long or 2M O/D over bed x 5M long, programable tailstock - 10 TONNE CAPACITY.
- Shanks CNC lathe with Fanuc controls 2.5M O/D x 12M long over bed - 30 TONNE CAPACITY.
- Colchester CNC lathe 550MM O/D x 1.8M long - 3 TONNE CAPACITY.
MANUAL LATHES
- Poreba manual long be lathe 1M O/D over bed x 10M long - 7 TONNE CAPACITY.
CNC ROLL GRINDER
- Churchill CNC cylindrical roll grinder 1.6M diameter x 10M long over bed - 15 TONNE CAPACITY.
DYNAMIC BALANCING
- IRD Dynamic balancing "2" plane 10M long components x 2M O/D.
VERTICAL BORER
- Webster and Bennett manual machine. 1.5M O/D x 1.2M high - 7 TONNES CAPACITY.
FULLY EQUIPPED TOOLROOM MACHINES
- 2 x vertical milling machines.
- 2 x centre lathes.
- Large radial drill.
- Ring grinder 450MM diameter.
TRANSPORT
- Iveco - Euro 5 engined flat be lorry. 2.48M wide x 9M long - 16.7 TONNES CARRYING CAPACITY.